User`s manual

Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual

Using BOOTP

in UNIX

Follow the instructions below to set the IP address using BOOTP:

1. Append the following entry to your boot table. This is typically

performed by editing the file:

/etc/bootptab

Example:

The AXIS 5570e/AXIS 5670e can automatically download a

customized config file from a TFTP server. Just add the name of the

config file and the TFTP server’s IP address to your boot table. The

config file is downloaded immediately after the AXIS 5570e/AXIS

5670e receives its IP address.

<host name>:ht=<hardware type>:vm=<vendor magic>:\

:ha=<hardware address>:ip=<IP address>:\

:sm=<subnet mask>:gw=<gateway field>

npsname:ht=ether:vm=rfc1048:\

:ha=00408c100086:ip=192.168.3.191:\

:sm=255.255.255.0:gw=192.168.1.1