User`s manual

Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual
28
7. To access the print server’s web pages, highlight the AXIS
5570e/AXIS 5670e in the list and select Server Home Page from
the Server menu.
Note:
Setting the IP address
using ARP/Ping
Refer to the appropriate section below to assign an IP address to your
AXIS 5570e/AXIS 5670e using ARP/Ping:
Windows
Open a Command Prompt and enter the following syntax:
The host will return reply from 192.168.3.191, or a similar message.
This indicates that the address has been set and that communication
is established. You are now ready to print.
UNIX, Mac OS X
Open a Terminal and enter the following syntax:
The host will return psname is alive, or a similar message. This
indicates that the address has been set and that communication is
established. You are now ready to print.
Important!
If your print server does not appear in the serial number list, refer to the AXIS IP
JumpStarter online help files.
Syntax Example
1.
2.
arp -s <Internet address> <Ethernet address>
ping <Internet address>
arp -s 192.168.3.191 00-40-8c-18-16-36
ping 192.168.3.191
Syntax Example
1.
2.
arp -s <Internet address> <Ethernet address>
ping <Internet address>
arp -s 192.168.3.191.00:40:8c:18:16:36
ping 192.168.3.191
You must define the Default Router and Subnet Mask when you set a static
IP address. Log in to the print server’s web pages and select Admin |
Network Settings | Detailed View | TCP/IP | Default Router and Subnet
Mask.
DHCP, Auto-IP, BOOTP and RARP must first be set to No!