User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 19: DBCS Support
279
Section 19 DBCS Support
The AXIS 5570e/AXIS 5670e supports Double-Byte Character Set
(DBCS) for SNA and TN5250E printing. This facilitates printing from
an IBM AS/400 host system for languages employing double-byte
character sets.
The following Chinese, Japanese and Korean DBCS tables are used in
the AXIS 5570e/AXIS 5670e:
AXIS 5570e/AXIS 5670e Double-byte Character Tables
Important! The AXIS 5570e/AXIS 5670e supports SNA DBCS printing in IBM 5494
emulation only.
Configuring the AS/400 Host, 5494 CU mode
Follow the instructions below to configure the AS/400 Host for DBCS
support:
1. Type WRKSYSVAL on the AS/400 command line and press Enter.
2. Check that the DBCS version installed indicator (QIGC) sysval is
set to 1 (on).
3. Check that the QIGCCDEFNT sysval is set to a DBCS font installed
in the system.
4. Proceed with the steps detailed in The AS/400 Host System
Checklist, on page 37.
Country Printer Emulation Character Table
Korea (KS) 5x27_002_TX_KS KS
Korea (KSSM) 5x27_002_TX_KSSM KSSM
Japan 5x27_001_TX Shift - JIS
China 5x27_005_TX GB