User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 18: IPDS Overview
275
IPDS PCL
Configuration
Click the IPDS PCL Driver Settings tab and enter the configuration
settings for the parameters as described below. When you are
finished, click OK at the bottom of the page to save your settings to
the print sever.
Language version Select the correct PCL language version depending on your connected
printer.
Symbol set Select the preferred symbol set from the drop-down list. The default
and recommended value is AUTOMATIC. The print server will
automatically select the appropriate symbol set.
PCL bin 1-5 Define the positioning by setting the parameters Horizontal Offset
and Vertical Offset to the desired values.
PCL Output Bin These parameters are for mapping the IPDS bin numbers to the bin
numbers of the connected PCL printer.