User`s manual

Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual
26
Notes:
Manual IP address
assignment
To establish communication with the TCP/IP network, an IP Address
must be assigned to your AXIS 5570e/AXIS 5670e. Choose the
appropriate method according to your network:
• AXIS IP JumpStarter™ software is an easy-to-use Windows
application that allows you to assign an IP address to your
print server and find print servers already installed in your
network. Refer to
Setting the IP address using AXIS IP JumpStarter, on
page 27
.
• ARP/Ping - use this method to set the IP address for each
new print server individually.
This method cannot be used over routers.
Refer to Setting the IP address using ARP/Ping, on page 28.
• AXIS ThinWizard™ software is the primary recommended tool
for large organizations.
It can set IP addresses, discover and group print servers,
install new firmware and configure multiple Axis products
concurrently.
Refer to Using AXIS ThinWizard for Print Server Management,
on page 189
• Use a Web browser with JavaScript support and Java enabled.
• The AXIS 5570e/AXIS 5670e supports WINS (Windows Internet Name
Service), which is recommended when setting the IP address using DHCP in
Windows environments.
• If you are working in a WINS/ DDNS network, you can access the print
server’s web pages using its default host name: In the Web browser’s
Location/Address field, enter the default print server name AXISxxxxxx
(xxxxxx are the last six digits of the serial number, found on the print
server’s underside label). Example: If the serial number is 00 40 8c 18 16
36, type AXIS181636 and press Enter.
• DHCP, RARP and BOOTP can be used to set the IP address in UNIX.
• If you are working in a network that does not use dynamic IP address
assignment, refer to Manual IP address assignment, on page 26 to assign
an IP address to the print server manually.