User`s manual

Section 15: Extended IBM Printer Emulation AXIS 5570e/AXIS 5670e User’s Manual

254

To set up the BAR parameter, use the %CONFIG command in your

document. To print bar codes, bar code commands may be included

anywhere in your documents. They begin with ‘percent-slash’ (

%/)

followed by the word BAR. Then follows the number of the bar code

definition to be used, a comma, and the sequence to be printed. The

command is ended by a semi-colon (;).

Setting up the bar code parameters and printing bar codes

Once the BAR parameter has been set up, you will only need to use

the bar code commands to print the bar codes

Resulting printout:

AXIS Cobra products

compatibility

The AXIS 5570e/AXIS 5670e supports a subset of the extended printer

emulation syntax of the AXIS Cobra products, including the bar codes

syntax. For more information, please refer to the AXIS Network Print

Server Technical Reference supplied on the AXIS Network Product CD.

%CONFIG+

BAR 0 = EAN8,12,4,ON;

BAR 1 = EAN8,12,8,ON;

SAVE;

%CONFIG-

%/BAR 0,"0123456"; %/BAR 1,"0123456";

0123 4565