User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 14: SNA Gateways
249
5. Configure PU and LUs. On the Configure PU Profile screen you
can set default LU attributes, starting dependent LU address,
number of dependent LUs, give CP a name, enable off-line test
mode, status assignment of LUs activated by host, status call
host at workstation attach, status PU profile start-up and logical
adapter name. On the Configure Dependent LUs screen you can
set VTAM LU name, lock for a session, LU type and model and
preserve host session.
6. Assign LU Resources and Access Control Lists (ACLs). On the
Configure Dedicated LUs you can dedicate a LU to a person or
device or group of persons. This person(s) is described in the
access control lists.
7. Configure Downstream PU. Choose Configure Downstream PUs
and press insert. Give it a name and fill in starting LU address or
leave at default, type in number of DownStream LUs and logical
adapter name:
The CSCON adds new parameters according to the adapter type you
have set. The resulting screen can look like this:
Concentrator gateway,
Microsoft
This is an outline of the procedure for configuring to a Microsoft SNA
Server. More information is provided in the Support section of the
Axis web site at http://www.axis.com
1. Configure host connection.
2. Configure downstream connection.
Configure Downstream PU Connection
Downstream PU name (CP name): _____________________________DPUname
Starting downstream LU address: ___________________________2
Number of downstream LUs: _________________________________1
Logical adapter name: _____________________________________
Netware Comm Services Config V2.0 Wednesday 1999 September 4 16.27
Configure LUs for Downstream PUs _______________Downstream PU: AXIS5570e
DLU __Address __PU Profile __LU Address __LU Type __Model __VTAM LU Name
002 __(0x02) ____SAA_MAIN ____15 (0x0F) __Printer __________________ACP4