User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 12: Upgrading the Firmware
239
6. Connect to the print server using ftp.
Type ftp 10.13.4.105
(Example using print server IP address 10.13.4.105)
7. Type root after "User:", press Enter.
Type pass after "Password:" (your entry will not be visible) press
Enter.
8. Change to binary mode transfer.
Type bin HASH (or binary HASH) and press Enter.
9. Use the 'put' command to upload the upgrade file to the flash
location:
(Example using firmware named 5570e_v2_6_42.bin):
Type put 5570e_v2_6_42.bin FLASH (FLASH written in capital
letters!)
Wait 30 seconds... Done! You will receive a message stating "Transfer
complete. Flash programming finished OK. "The print server will
restart in five seconds running the new software. When you see a
new ftp prompt the procedure has been completed successfully.
Obtaining the Software
You can obtain all the print server firmware as well as the latest
utility software from the following locations:
• http://www.axis.com
• your local dealer