User`s manual

Section 12: Upgrading the Firmware AXIS 5570e/AXIS 5670e User’s Manual
238
Upgrading using FTP To upgrade over the network using FTP you will need a file with the
new print server firmware. The name of this file is in the form
product_version.bin.
You can use any of the previously mentioned methods to obtain the
new file. You must assign an IP address to the AXIS 5570e/AXIS
5670e before you can use this upgrading method.
Caution!
The objective of this example is to upgrade a print server with
firmware version 6.41 to firmware version 6.42.
This description from Windows XP uses the following examples:
• Print server model: AXIS 5570e
• IP address of print server: 10.13.4.105
• New firmware version name: 5570e_v2_6_42.bin
• Location of firmware and upgrade procedure: C:\Axis
(Create a new file named e.g. ‘Axis’ on your hard drive and
download the firmware to that location).
1. From www.axis.com, download the firmware and save it to a file
on your computer, e.g. C:\ Axis
2. Open a command prompt from Start => Run.
The Run window will appear.
Type cmd and click OK.
3. The DOS Command Prompt window will open.
Type c: and press the Enter button on your keyboard.
4. The firmware is saved in C:\Axis
Type cd Axis
5. Type dir and press Enter.
The Axis directory you have created will list all files:
Be careful not to interrupt the file transfer. If the transfer is interrupted, the AXIS
5570e/AXIS 5670e may have to be re-initialized by your dealer.