User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 12: Upgrading the Firmware
237
1. Click the Firmware button. The Firmware Wizard starts.
2. Browse through the upgrading tips and click Next > when you are
done. Select Latest Available Version. Click Next >.
3. Select the servers you want to upgrade, by checking the correct
upgrade boxes. Click Next >.
4. Enter the default User ID and Password of the servers you selected
in the previous step. Select whether you want AXIS ThinWizard to
verify the password immediately or when the upgrading job has
started, by checking the appropriate box. Click Next >.
5. If you do not have a default password, just click Next >. If some
of your servers use a different User ID or Password than the default
entries, they will be displayed in the Remaining servers list. Enter
the User ID and Password for each individual server. Click Next >.
6. Name the upgrade job. This is optional, so you can leave the field
blank if you want. Click the Start button to start the upgrading job.
Refer to Using AXIS ThinWizard software for Print Server
Management, on page 92, for more information about AXIS
ThinWizard.