User`s manual

Section 11: Configuration Possibilities AXIS 5570e/AXIS 5670e User’s Manual
234
Importing a Certificate When you receive the PEM-encoded certificate from your Certificate
Authority, open the print server’s Web interface and select Admin |
Security Settings. Click Import and follow the instructions on the
screen.
https:// Whenever SSL/TLS is enabled, you can only reach the print server’s
Web interface through the secure services. The unsecure way via
http:// is closed and now you have to address the print server’s Web
interface in the secure way, i.e. via https://.
Disabling Protocols To further increase security, you must disable protocols that are
considered insecure;
• FTP (used by AXIS ThinWizard. If FTP is disabled, AXIS ThinWizard
can not function properly.)
•Telnet
•Auto-IP
•DHCP
•BOOTP
• Remote Config (used by AXIS NetPilot)
• SNMPv1 Configuration
To disable these protocols, go to Admin | Security Settings |
Protocol Settings | Detailed View and mark the check boxes. Click
OK to finish. Only enabled protocols will be visible from this view!
To enable these protocols, select Admin | Network Settings |
Detailed View | TCP/IP for FTP, Telnet, AutoIP, DHCP and BOOTP.
Remote Config is enabled via Admin | General Settings | RConfig
Support.