User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 11: Configuration Possibilities
227
The PostScript font can be any font that is installed in the printer. If
no font is specified, Courier will be used.
Example: Follow the instructions below to set the PostScript parameters for
logical printer PR2:
1. From the print server’s internal Web page, select Admin | Logical
Printers.
2. Select the PR2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Set the PostScript Page Size parameter to LETTER.
5. Set the PostScript Page Orientation parameter to LANDS.
6. Enter the string 48 0 120 60 30 50 in the PostScript Page
Format text field.
7. Enter the string Helvetica in the PostScript Font text field.
8. Click the OK button.
Redirecting Print Jobs
when a Printer is Busy
If print data is received for a printer that is already busy, the host
normally must wait. However, with a two-port print server it is
possible to use a logical printer to redirect the print data to another
logical printer when the target printer is busy. If the second printer is
also busy, the host must wait until the target printer is ready.
Example: Follow the instructions below to redirect PR1 print jobs to PR3, when
the printer assigned to PR1 is busy (USB1 and LPT2 are used as
examples here):
Hex code Explanation
48 48 lines per page
0 disable line wrap
120 120 = 12 characters per inch
60 60 = 6 lines per inch
30 30 = 3 mm left margin
50 50 = 5 mm top margin