User`s manual

Section 11: Configuration Possibilities AXIS 5570e/AXIS 5670e User’s Manual
226
Activate your desired filter by setting the Printer Language
Translation (PRx_FILT.) parameter.
Example: Follow the instructions below to convert ASCII print data to
PostScript for logical printer PR2:
1. From the print server’s internal Web page, select Admin | Logical
Printers.
2. Select the PR2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Click the OK button.
If you select the parameter value AUTO_PS, the print data for every
print job is searched and if any ASCII data is found, it is translated
into PostScript. This setting is recommended if you are not sure if the
print data is ASCII or PostScript.
PostScript Settings When a logical printer is set for PostScript conversion, you must
specify the following:
•page size
• page orientation
• page format
• which font to use
The default page size is A4 and the default page orientation is
Portrait, while the page format parameters are as follows:
Page Format Parameter Default Value Comment
Lines per page (MPL) 66
Characters per line (MPP) 0 0 = disable line wrap
Characters per inch (CPI) 100 100 = 10 char per inch
Lines per inch (LPI) 60 60 = 6 lines per inch
Left margin (LM) 30 30 = 3.0 mm
Top margin (TM) 50 50 = 5.0 mm