User`s manual

Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual
22
Installation Guide
After connecting the AXIS 5570e/AXIS 5670e to your network, you
are now ready to perform the basic setup procedures. The method of
installation that you choose should be dictated by your printing
requirements and the type of network into which you are integrating.
1. Start out with setting an IP address on the print server, described
in Setting the IP address, on page 24.
2. Refer to the table below to determine which setup procedures
that are relevant to your network environment.
Environment Data
Stream
Network
Configuration
Actions
AS/400 SCS / IPDS SNA SNA Printing - 5494 Mode, on page 36
SCS TN5250E (TCP/IP) TN5250E printing (SCS over IP), on page 48
IPDS PPR/PPD (TCP/IP) PPR/PPD Printing - IPDS data streams, on page 51
IBM
Mainframe
SCS / IPDS SNA SNA Printing, on page 60
SCS / IPDS TN3270E (TCP/IP) TCP/IP TN3270E Printing, on page 70
IPDS PPR/PPD (TCP/IP) PPR/PPD Printing - IPDS data streams, on page 82
NetWare TCP/IP and IPX/SPX Setting Up - NetWare, on page 123
Windows
98/NT/Me
2000/XP
TCP/IP,
NetBIOS/NetBEUI
Setting Up - Windows, on page 101
Macintosh TCP/IP, AppleTalk Setting Up - Macintosh, on page 158
UNIX TCP/IP Setting Up - UNIX, on page 165