User`s manual

Section 11: Configuration Possibilities AXIS 5570e/AXIS 5670e User’s Manual
210
Firewall
Considerations with
IPP
If there are one or more firewalls between the IPP client and the
server, you may have to make some changes to the firewall
configuration. IPP uses TCP Port 631 for printing, so any firewalls
between client and server must be configured to allow bi-directional
traffic on that port. Please consult your network administrator if you
think any configuration changes are necessary.
How to Print from
Windows 98:
Before you print to an IPP printer you will need to know:
• the http:// address of the print server. The http:// address con-
tains the IP address or host name of the print server and the
printer port name.
• the brand and type of the printer in order to install the appropri-
ate printer driver.
If your destination printer does not exist in your Printer name list,
you need to add it. Adding an IPP printer to your printer list is
described below.
1. Select the IPP printer to which you want to send your document.
Choose the destination printer from the Printer name field (in
File | Print).
2. When you press Print, the print job is sent over the Internet to
the AXIS 5570e/AXIS 5670e, which then forwards the print job to
the destination printer.
3. The recipient of the print job can collect the print job at the
destination printer.
Adding an IPP Printer
to your Printer List in
Windows 98
1. Install the IPP client for Windows 98 on your computer. This IPP
client can be downloaded from the Microsoft Web site.
2. Open Start | Settings | Printers.
3. Choose Add Printer, then Network Printer.
4. In the Printer field in the Connect to Printers window, write the
http:// address of the destination printer.
(Example: http://171.16.5.218:631/USB1)