User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 3: Basic Installation
21
Mounting the AXIS 5570e
Using the supplied clip and holder, the AXIS 5570e can be mounted
e.g. on the back of the printer or on a wall.
The print server can now be installed in your network using one of
the methods detailed in the Installation Guide, on page 22.
Notes:
Adhesive Clip
Fasten to print
server by peeling
off adhesive tape.
Adhesive Holder
Fasten to
mounting surface
by peeling off
adhesive tape.
• The test page includes a list of the most important parameters, including
the network speed and the firmware version number.
• Each print server is pre-configured with a unique node address that is
identical to the serial number. The node address can be changed using any
standard Web browser. Please refer to Management and Configuration,
on page 180, for more information.
• The AXIS 5570e/AXIS 5670e
uses high speed Centronics communication.
For use with older printers not supporting high speed, this function can be
disabled by using any standard Web browser. Please refer to Section 10
Management and Configuration, on page 180, for more information.