User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 11: Configuration Possibilities
205
Section 11 Configuration Possibilities
This section describes some special features offered by the AXIS
5570e/AXIS 5670e:
Autodetect Printer Type, on page 205
AutoIP, on page 206
E-mail Notification, on page 206
Flash Loading of Firmware over the Web, on page 230
IPP (Internet Printing Protocol), on page 207
Logical Printers for Customized Printing, on page 220
Network Speed, on page 230
NetWare Packet Signature Level 1,2,3, on page 230
Secure Web Services — SSL/TLS, on page 231
Autodetect Printer Type
The print server can automatically detect the type of printer you are
using if you enable Autodetect Printer Type. The print server can
then recognize Epson and Hewlett Packard InkJet printers. Most
Epson and Hewlett Packard InkJet printers that have Mac OS printer
drivers for network printing are supported. If Autodetect Printer
Type is disabled, the AppleTalk printer type has to be specified
manually in the print server. For Epson InkJets it would be
"EPSONLQ2" and for HP InkJets it would be "DeskWriter". If the print
server does not recognize the connected printer the default setting,
"LaserWriter" will be used as printer type. "LaserWriter" is the
recommended setting to be used with all PostScript printers.
To enable Autodetect Printer Type, log in to your print server’s Web
interface and select Admin | Network Settings | Detailed View |
Macintosh | Auto Detect Printer Type | Yes.
See the Help pages in the print server’s Web interface for details.