User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 10: Management and Configuration
203
Configuring the Print Server from an IBM host
Once communication with an IBM host has been established, all the
AXIS 5570e/AXIS 5670e parameters can be edited by printing a file
containing special configuration commands. To start the
configuration, the command
%CONFIG+ is entered in the file. To
protect your settings, a password must be provided. By default, the
password is
pass. When all parameters are set, the command SAVE is
used to store the parameters permanently. The command
%CONFIG-
leaves the configuration mode and resumes normal printing. The
syntax for the file to print is:
In order to maintain backward compatibility and increase security,
many parameters that are not related to the IBM printing operation
have to be preceded by the
%CONFIG++ command. When all
parameters are set, enter
%CONFIG--. The parameters requiring
%CONFIG++ are clearly marked in the parameter listing on the
following pages.
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
SAVE;
%CONFIG-
%CONFIG+ <password;>
IBM_PRINTING_PARAMETER_NAME = VALUE;
%CONFIG++
PARAMETER_NAME = VALUE;
%CONFIG--
SAVE;
%CONFIG-