User`s manual

Section 3: Basic Installation AXIS 5570e/AXIS 5670e User’s Manual
20
Connecting a printer to the Ethernet Network
Follow the instructions below to connect a printer to the network via
the AXIS 5570e/AXIS 5670e print server.
Important:
1. Switch off
the printer(s) and disconnect the AXIS 5570e/AXIS
5670e external power supply.
2. Locate the serial number, found on the backside label of the print
server, and write it down. You will need this number during the
network configuration.
3. Connect the print server to the printer(s).
4. Connect the print server to the network using a twisted pair RJ45
cable (of category 5 or better).
5. Switch on the printer(s) and connect the external power supply
to the AXIS 5570e/AXIS 5670e. The power indicator lights up. If
the network indicator starts to flash, the print server is correctly
connected to the network.
6. Press and release the test button on the print server to print a
test page.
If the print server is correctly connected to the printer(s), a test
page will be printed.
Make sure that the AXIS 5570e/AXIS 5670e external power supply is marked with
the correct voltage!