User`s manual

Section 10: Management and Configuration AXIS 5570e/AXIS 5670e User’s Manual
198
Follow the instructions below to perform a hexdump printout for the
SNA printing protocol:
1. Log in to the AXIS 5570e/AXIS 5670e by typing:
telnet <host name> or telnet <IP address> in a DOS
windows (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass.)
3. Enable the AXIS 5570e/AXIS 5670e to hexdump mode by typing:
snahexdump
4. Select Start Logging from the Terminal menu in the Telnet
window. Specify a file name and select the folder where you
want to save the file.
5. Start the print job.
6. When the print job is finished, select Stop Logging from the
Terminal menu.
7. Enter the quit command
Replace the command in step 3 above with
tnehexdump for the
TN3270E and TN5250E protocols,
lpdhexdump for the LPR/LPD
protocol, or
rtnhexdump for the reverse Telnet protocol.
Telnet Help By typing help in step 3 in any of the Telnet instruction sets above, a
list of all available commands will be displayed.