User`s manual

Section 10: Management and Configuration AXIS 5570e/AXIS 5670e User’s Manual
188
Software Default A Software Default will reset all print server parameters and settings
to their default values except:
• Node address (NODE_ADDR.)
• IP Address (INT_ADDR.)
• DHCP enabled (DHCP_ENB)
• Installed certificate
•Private key
A Software Default differs from a Factory Default in that the latter is
done by pressing the test button in a specific sequence to
default/clear all print server parameters to default.
See The Test Button, on page 132 for instructions on performing a
Factory Default.
Firmware Upgrade Upgrades the print server’s internal software.