User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 8: Setting Up - Macintosh
161
4. Click the name of the printer you want — the ports are shown as
<host name>_<port>. Example: AXIS100086_USB1.
5. Click the Close box. This completes the configuration and closes the
Chooser.
Repeat this procedure for each Macintosh computer on the network
using the print server.
LaserWriter 8.0
Printer Driver
Follow the instructions below to choose a printer:
1. Select Chooser from the Apple menu.
2. Click the LaserWriter 8.0 icon.
3. If your network has more than one zone click on the zone you want.
(If your network does not have any zones, this box will not appear.)
4. Click the name of the printer you want — the ports are shown as
<host name>_<port>. Example: AXIS100086_USB1.
5. Click Setup... and then Auto Setup. If the selected printer
supports bi-directional printing and the appropriate PPD file is
available, the installation is performed automatically and you
can therefore proceed directly to step 7 (if this is not the case,
the PPD file must be selected manually, as described in step 6).
6. Choose the PPD file matching your printer, and click OK.
If your printer does not appear in the PPD file list, please contact
your printer vendor. Use the Generic PPD if you do not need any
printer specific features.
7. Click OK, and then click the Close box. This completes the
configuration and closes the Chooser.
Repeat this procedure for each Macintosh computer on the network
using the print server.
Bi-directional
Support
The AXIS 5570e/AXIS 5670e allow the printer driver to communicate
directly with the printer and consequently facilitates complete
functional control over print jobs, e.g. automatic downloading of
fonts not resident in the printer.