User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 8: Setting Up - Macintosh
159
Note:
Installation on MacOS 9.1 or older, using AppleTalk
Basic Configuration On MacOS 9.1 or older, basic configuration in AppleTalk is performed
simply by opening the Chooser window and selecting a printer.
You can change the default name of your print server or any of
default parameters by editing the print server’s config file. To access
the config file from a Macintosh, you can use:
• any Web browser with Javascript enabled
• FTP using MacTCP, Fetch or Anarchie
In order to use any of these methods, you must assign an IP address
to the print server as described in Setting Parameters, on page 163.
If you want to print using LPR, select:
1. Printers | Add Printer...
2. From the Printer List dialog, select LPR printers using IP.
3. Enter the IP address or host name of the print server in the LPR
printer’s Address field. You must uncheck
the Use Default
Queue on Server check box and enter a Queue Name:
Physical ports: USB1, LPT1, LPT2 or COM1
4. Choose a printer driver from the Printer Model list and click Add
to finish.