User`s manual

Section 7: Setting Up - NetWare AXIS 5570e/AXIS 5670e User’s Manual
152
3. Click the Connect... button. The Connect NetWare Print Queues
window appears.
The AXIS NetPilot Connect NetWare Print Queues window
4. Select the tree or server location of the print queue from the
Resources box.
5. Select an existing print queue to connect to the server port, or
create a new print queue by clicking on Create Queue... If you have
selected an existing queue, advance to step 8. Continue with step
6 only if you want to create a new queue.
6. Type the queue name in the Create Queue dialog window. If you
want to create a queue in the NDS tree you must also enter the
name of the volume where the queue will be located. Click OK.
7. Select the newly created queue from the queue list.
8. Select Print Server Mode or Remote Printer Mode. If you selected
Print Server Mode, advance directly to step 11, otherwise continue
with step 9.
9. Select an appropriate NetWare Print Server name, that will be
associated with the AXIS 5570e/AXIS 5670e print server, by using
the Browse... button.