User`s manual

Section 7: Setting Up - NetWare AXIS 5570e/AXIS 5670e User’s Manual
150
The IP address
Choose the method the AXIS 5570e/AXIS 5670e should employ for
obtaining an IP address. DHCP, ARP, RARP, BOOTP and Auto-IP are
supported. You can also select to set the IP address manually. Refer
to Assigning an IP Address to the Print Server, on page 14 for further
information about setting the IP address.
Print Queues The AXIS 5570e/AXIS 5670e uses the print server name followed by
the printer port as the default Print Queue name and print server port
name. If you want to change the default printer queue names, just
type the new names in the available text fields.
Test Page The final user prompt in the Installation Wizard allows you to print a
test page through NetWare. The test page displays the name of all
the NetWare servers the AXIS 5570e/AXIS 5670e is connected to and
shows the status of each connection.
Unless you want to connect or create additional printing queues, the
installation for the NetWare environment is now completed.
Notes:
Advanced Installation using AXIS NetPilot
Having installed your AXIS 5570e/AXIS 5670e print server in
accordance with the basic installation procedures described in Basic
Setup with AXIS NetPilot, on page 149, your AXIS 5570e/AXIS 5670e
print server should now feature in the ‘Network Print Servers’ folder
• The parameters entered during installation are not permanent; they can be altered
at any time according to your network printing requirements.
• No serious or permanent damage will be caused if you make a mistake during
installation. If you find, at any time, that printing is not satisfactory, the parame-
ters can easily be changed to tune the system to your requirements.
• For information on advanced functions, please refer to the AXIS Network Print
Server Technical Reference. You can download this or other technical information
over the Internet by accessing www.axis.com