User`s manual

Section 7: Setting Up - NetWare AXIS 5570e/AXIS 5670e User’s Manual
126
7. In the Select the printer’s type window, choose your printer. If you
cannot find the printer, select an appropriate Generic one (PCL, PS,
etc)
8. Select TCP/IP (default) or IPX as network protocol. Click Next.
9. You will find the print server in the next window with the printer
attached on the connected port. Depending on the transport
protocol you used when you start the installation, the print server
should appear as following:
• TCP/IP Network protocol:
IP Address and Port, e.g: 192.168.70.243 and LPT1