User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 6: Setting Up - Windows
119
Adding Printers in Windows 98 and Me over TCP/IP using AXIS Print Monitor
1. Install AXIS PrintMonitor on all workstations that will print via
the Axis print server.
2. Next, start the Windows Add Printer Wizard: select Settings |
Printers from the Start menu and double-click the Add Printer
icon.
3. After clicking Next in the first dialog, the Wizard asks you to
select between Local Printer and Network Printer. You must
select Local Printer as the print server emulates a local printer
port. Click Next.
4. Choose the appropriate print driver for your printer. If the desired
print driver already appears within the displayed Manufacturers
and printers lists, highlight your selection, click Next and
proceed directly to step 7. It is only necessary to perform steps 5-
6 if your printer does not feature in the model list.
5. Click the Have Disk... button. Insert the printer driver diskette/CD
into the appropriate disk drive of your computer.
6. Select the type of printer you want to install from the
diskette/CD and click Next. If you already have the printer’s
driver installed, you will be asked whether to keep it or to replace
it.
7. Select the Printers@TCP/IP Port and click Next.
8. Enter an appropriate name for your printer and choose whether
you want it to be the default printer. Click Next.
9. In the next window, do not
order a Test Page to be written, just
click Finish.
10. The printer you have defined will now be displayed in the Printers
Folder. Right-click the printer object and select Properties.
11. Click the Details tab within the Properties page and then click
Add Port to display the available monitors.