User`s manual

Section 6: Setting Up - Windows AXIS 5570e/AXIS 5670e User’s Manual
118
6. Select the AXIS Port you want to add from the list of available ports.
The port appears as <name>.<port> (Example: AX100086.LP1). The
<port> is taken from the table below. Click OK.
7. Close the Printer Ports window.
8. Click the Configure Port... button. Choose whether error condition
pop-up messages are to be displayed by checking the box in the
Configure Axis Ports dialog. Define the frequency at which the error
messages should be displayed after retry. Click OK. Continue the
installation by clicking Next.
9. Choose the appropriate printer driver for your printer. Click Next
and proceed directly to step 12. It is only necessary to perform steps
10-11 if your printer does not appear in the list.
Note:
10. Click the Have Disk... button. Insert the printer driver diskette/CD
that was provided with your printer, select the appropriate
diskette/CD drive and click OK.
11. Select the printer driver you want to install and click Next.
12. Enter an appropriate name for your printer and click Next.
13. Choose whether you want to share the printer with other network
users and click Next.
14. Choose whether you want to print a test page and then click Finish.
Ports
available
USB port Parallel port
1
Parallel port
2
Serial port
AXIS 5570e US1 LP1 — —
AXIS 5670e - LP1 LP2 CM1
Even if the desired printer is available in the Manufacturers and Printers lists,
you are advised to use the printer driver provided with the printer. This assures
you of the latest driver software.