User`s manual

Section 6: Setting Up - Windows AXIS 5570e/AXIS 5670e User’s Manual
112
Adding Printers in Windows NT 4 Using the Microsoft LPR Monitor
If you have not already done so, you should perform the TCP/IP basic
setup procedures prior to installing a printer for LPR printing.
Preparing for
LPR Printing
In the Control Panel, double-click the Network icon. Select the
Services tab. If the TCP/IP Printing entry appears, then TCP/IP is
already installed. Close the Network folder and go on to Installing an
LPR printer, below.
First, prepare for LPR printing:
1. Open the Control Panel and double-click the Network icon.
2. Select Protocols.
3. Add TCP\IP Protocol.
4. Select Services.
5. Add Microsoft TCP\IP Printing.
Installing an LPR
Printer
1. Go to Start | Settings | Printers | Add Printer. Select My
Computer (for peer-to-peer printing) and click Next.
2. From the Available Ports list, choose the appropriate printer port,
which will appear as the host name or IP address of the print server.
Skip to step 7.
3. If the host name or IP address of the print server you wish to use
does not
appear in the list, click Add Port.
4. Choose LPR Port from Available Printer Ports and click New Port.