User`s manual

AXIS 5570e/AXIS 5670e User’s Manual Section 6: Setting Up - Windows
109
Adding Printers in Windows 2000/Windows XP using the Microsoft LPR Monitor
This section describes how to set up a Windows 2000/XP server for
LPR printing over the TCP/IP protocol, using the built-in Microsoft
LPR Monitor i.e. Print Services for UNIX.
Note:
Basic Setup If you have not already done so, you should perform the TCP/IP basic
setup procedures prior to installing a printer for LPR printing.
Preparing for
LPR Printing
Follow the following steps to prepare for LPR printing:
1. Open the Control Panel.
2. Click Add/Remove Programs.
3. Click Add/Remove Windows Components.
4. Check Other Network File and Print Services and click Details.
5. Check Print Services for Unix and click OK.
6. Click Next and Finish.
7. Close Add/Remove Programs and the Control Panel.
Installing an LPR
printer
Follow the instructions below to use the standard Windows method
for installing an LPR printer in Windows 2000/XP:
See Alternative Method for LPR Printing, on page 111 for
instructions on how to set up printing over LPR without
installing Print Services for Unix.