User guide

Batches
System User Guide
D5033331 A
AB SCIEX TripleTOF
®
5600/5600+ Instruments
53 of 116
Add Sets and Samples to a Batch
A set can consist of a single sample or multiple samples.
1. In the Navigation Bar, under Acquire, double-click Build Acquisition Batch.
Figure 5-2 Batch Editor
2. In the Sample tab, in the Set list, type a name.
3. Click Add Set.
4. Click Add Samples to add samples to the new set.
Figure 5-3 Add Sample dialog
5. In the Sample name section, in the Prefix field, type a name for the samples in this
set.
6.
To add incremental numbering to the end of the sample name, select the Sample
number check box.
7. If the Sample number check box is selected, in the Number of digits field, type the
number of digits to include in the sample name.