User guide

Hardware Profiles and Projects
AB SCIEX TripleTOF
®
5600/5600+ Instruments
32 of 116
System User Guide
D5033331 A
9. (Optional) If using an integrated syringe pump, select Use integrated syringe
pump.
Figure 2-4 Configuration tab
10. Click OK to return to the Create New Hardware Profile dialog.
11. Click Add Device and then add and configure each peripheral device that is used
with the instrument. Refer to Add Peripheral Devices to Hardware Profiles on
page 33.
12. Ensure all changes are accepted and then click OK.
13. To activate the hardware profile, in the Hardware Configuration Editor, click the
hardware profile and then click Activate Profile.
A green check mark appears next to the profile.
14. Click Close.
15. Next steps: Either create projects and subprojects or optimize the instrument.
• Create Projects and Subprojects on page 35.
• Instrument Tuning and Calibrating on page 39.
Tip! A hardware profile does not have to be deactivated before activating
another. Click a hardware profile and then click Activate Profile. The other
profile is deactivated automatically.