User guide

System Information
AB SCIEX TripleTOF
®
5600/5600+ Instruments
22 of 116
System User Guide
D5033331 A
Use the Integrated Syringe Pump
Edit the Hardware Profile for the Integrated Syringe Pump
Make sure that the serial (RS-232) cable is connected between the computer and mass
spectrometer.
Make sure the syringe pump is seated properly to avoid damaging the syringe. For more
information about creating and editing hardware profiles, refer to Create a Hardware Profile on
page 29.
1. In the Navigation bar, under Configure, double-click Hardware Configuration.
2. Create or edit the hardware profile containing the instrument.
3. In the Devices in current profile box, select the mass spectrometer and click Setup
Device.
4. In the Configuration tab, select Use integrated syringe pump.
Figure 1-3 Mass Spectrometer dialog