User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 91
Section Four: Using Markers Using e Chalkboard
From the Keyboard
To go to the next or previous overlay
ActivatetheNextOverlayorPreviousOverlaycommand.
e next or previous overlay of markers is displayed, and an overlay # briefly
appears in the corner of the screen.
Togotoanout-ofsequenceoverlay
1. ActivatetheGoToOverlay#command.
A small “#” sign appears in the lower-right corner, followed by an underscore
prompting you to type a number.
2. Typeintheoverlaynumber.
e overlay corresponding to the number appears. is selection is confirmed
by a brief display of the overlay number in the lower-right corner of the
screen.
NOTE: If you do not respond within a few seconds, the overlay does not
change.
Turning Off the Marker Overlay
When the keyboard is installed, you can turn off the Pointmaker overlay to view
the video image without any markers. When you turn the overlay on again, the
markers you anchored on that overlay will reappear. You can only activate this
command from the keyboard.
1. ActivatetheMarkerOverlayOn/Ocommand.
e markers disappear.
2. ActivatetheMarkerOverlayOn/Ocommandagain.
e markers reappear.