User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 87

Section Four: Using Markers Clearing Markers

Figure4-4:EraseMethodMenu

e Erase Method dialog appears.

4. SelectanerasersizeSMALL,MEDIUM,orLARGE.

e active size displays a highlighted ﬁll.

NOTE: e larger the eraser size, the more area you can clear in a single

motion. If you do not select an eraser size, the Pointmaker will default to

Medium.

5. Exitthemenusystem.

Erasing Procedure

Followtheseinstructionstoerasemarkers.BesureyouareinErasemode

beforeimplementingtheseprocedures(see Erasing Markers, on page 84).

FromtheSMARTBoard

e default mode for SmartBoard operation is Clear. When you remove the eraser

from the SmartBoard pen tray and touch it any where on the board, the Pointmak-

er overlay will clear.

If you would prefer to erase the Pointmaker overlay in the same way that you

would erase dry erase markers, please use the following pro cedure:

1. Aftermarking,activatetheUndo/Erasecommand.

2. Pickuptheeraser.

3. Wipetheeraseroveryourmarkers.