User guide

Page 86 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Clearing Markers Section Four: Using Markers
From the Digitizing Tablet
PressthetipbuttonontheUNDOiconlocatedonthetabletMenuStrip.
e most recently anchored marker disappears. An active pointer remains on
screen unless the pointer has been disengaged.
NOTE: You can undo markers even if you are in PC Mode.
From Other Controllers
ActivatetheUndocommandforyourparticularcontroller.
e most recently anchored marker disappears. An active pointer remains on
screen unless the pointer has been disengaged.
Erasing Markers
Follow these instructions to erase markers from the overlay, wiping them clear like
a traditional eraser. You activate Erase mode from the menu system, but you erase
the markers using your drawing device.
When you are in Erase mode, you can no longer undo markers. Conversely, when
you are in Undo Mode, you cannot erase markers.
NOTE: Entering Erase mode clears markers from any overlays that you might
have stored.
Activating Erase Mode
1. Activatethemenusystem(see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1, Main Menu, on page 30).
2. SelecttheANNOTATIONoption
e Annotation menu appears (see Figure 3-3, Annotation Menu, on page 34).
3. SelectERASEMETHOD.