User guide

Page 76 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Assigning Marker Appearance Section Four: Using Markers
All lines drawn from this point on will appear in the newly selected line width
and style.
Selecting Pointers
You select a pointer type while the pointer is active, or positionable. After you
anchor the pointer, you cannot change that pointer’s type. However, you can erase
or undo the anchored pointer and begin again (see Erasing Markers, on page 84).
From the Digitizing Tablet
1. Clickthepentiponthedesiredpointericonontablet.
e corresponding active pointer appears on screen, ready for posi tioning or
anchoring.
From the Keyboard
1. RepeatedlyactivatethePOINTERScommanduntilthedesiredpointer
typeappearsonscreen.
You can scroll backwards through the pointer options, by activating the
Reverse Toggle command.
e pointer you selected appears on screen, ready for positioning.
From the Menu System
1. Activatethemenusystem(see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1, Main Menu, on page 30).
2. SelecttheANNOTATIONoption
e Annotation menu appears (see Figure 3-3, Annotation Menu, on page 34).
3. SelectthePOINTERSoption.