User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 65
Section ree: CPN-5600 Menu System Multipoint
OR:
4. If you are joining a meeting someone else has created, enter the NAME
and PASSWORD they have assigned to it. en select JOIN CURRENT.
e person who creates the meeting must communicate the name and
password to all participants.
5. Exit the menu system
You can now interactively mark over any displayed images.
OR:
6. If you wish to exit a meeting you have joined, select EXIT MEETING.
You are disconnected from the meeting. You may select a different menu
option or exit the menu system
Configure TFTP Settings
e Pointmaker TFTP feature gives you the ability to save and retrieve images
using the TFTP protocol. To save a file using TFTP, you must first install a TFTP
server on the computer which will receive the file(s). ere is a free TFTP server
available from solarwinds.com which has been tested successfully with the
CPN-5600. You will need the IP address of the server where TFTP is installed. It’s
also important to make sure your firewall does not block it.
e following steps are required to allow the unit to communicate with the
computer where TFTP has been installed and set up.
1. Activate the menu system (see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1, Main Menu, on page 30.)
2. Select the NETWORK option.
e Network Menu appears (see Figure 3-31, on page 58).
3. Select the TFTP option.