User guide

Page 64 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Multipoint Section ree: CPN-5600 Menu System
4. Enter the IP address of the computer acting as your Multipoint server.
Check with your IT administrator if you don’t know this address.
You may use our server at 199.223.210.127
5. Enter the Port number.
is is usually 10001. Our server’s port number is 10001.
6. Continue to the next section.
Create, Join or Exit a Multipoint Meeting
Once all the previous steps have been accomplished, the Pointmaker unit is ready
to support the Multipoint features. ese steps explain how you can cre ate a
Multipoint meeting that other Multipoint enabled Pointmakers can join. We also
explain how you can join a Multipoint meeting that someone else has created.
Finally, we explain how to exit a meeting you have joined.
1. Select CONNECT.
Figure 3-35: Multipoint Connect dialog
e Multipoint Connect dialog appears.
You then have two options:
2. If you are creating a new meeting, enter the NAME of the meeting and the
PASSWORD you wish to assign. en select CREATE NEW.
You will need to communicate your choices for name and password to each of
the other people who will be attending the meeting.
3. Exit the menu system.
You can now interactively mark over any displayed images.