User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 61
Section ree: CPN-5600 Menu System Network Features
3. Select the Network 1 Setup option.
Figure 3-32: Network Setup dialog w/sample data
e Network 1 Setup dialog appears.
is dialog prepares the CPN-5600 for communicating on your network.
e Network 1 and Network 2 dialogs are identical except for setting the
Nameserver, which is only found in this dialog. ey correspond to the two
network ports at the back of the unit.
4. Select OFF, DHCP or STATIC.
If you select OFF, no further action is required. e network is diabled.
If DHCP is selected, IP ADDRESS, NETMASK, GATEWAY and NAM-
ESERVER are assigned automatically.
If STATIC is selected, you must make entries for IP ADDRESS, NETMASK,
GATEWAY and NAMESERVER. (is is the default setting.)
Consult with your IT administrator if you need help with these entries.
5. Select APPLY SETTINGS to finish the network configuration.
6. Exit the menu system.