User guide

Page 58 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Serial Port Settings Section ree: CPN-5600 Menu System
e USB Devices dialog appears.
Up to 10 USB devices can be connected through the use of hubs.
NOTE: All the USB devices installed on your CPN-5600 are listed by
port number, with the device type displayed to the right of each number.
If the device type is in blue, it has been assigned through the autodetect
procedure at startup.
NOTE: When the question mark to the right of the device is selected,
the system displays the vendor and product ID for the device.
5. (optional) Select the device type you wish to have permanently assigned.
By selecting the device, it becomes permanently assigned. e text color then
changes from blue to black. With the device permanently assigned, the next
time the CPN-5600 is powered up, the autodetect procedure will skip this
device.
e system does an excellent job of immediately detecting and rec ognizing
USB devices, even when their position on the hub changes. ere are two
instances where you might want to permanently assign a device type to a
device (so autodetect won’t try to re-assign it at the next boot-up): 1) if the
device was marketed after your CPN-5600 system was manufactured or 2) if
the system misidentifies the device.
6. (optional) To manually change the device type, select the arrow to the
right of the device type you wish to change.
Figure 3-29: Device Select Dialog (Your listing may differ.)