User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 51
Section ree: CPN-5600 Menu System Calibrating CPN-5600 Controllers
Figure 3-21: Calibrate Touch Screen Dialog
e Calibration dialog for the selected controller appears.
5. Follow the calibration instructions displayed.
After you perform final calibration procedures, the Calibration dialog
automatically disappears, and you return to the menu system.
6. Exit the menu system.
Repeat this process for each video input on your touch screen display.
Storing (Copying) a Calibration
For each video output, the CPN-5600 has nine memory locations where cali-
brations can be stored for later recall. ey are numbered 1 through 9. Loca tion
0(zero) is considered the default memory location, and stores whatever calibration
was last done. If you anticipate changing calibrations on a frequent basis, storing
your calibrations in locations 1-9 makes it easy to change the active calibration
without 1) going through the calibration procedure, and 2) having to reboot the
CPN-5600.
Figure 3-22: Copy Calibration Menu
To store a copy of the last manual calibration (stored in location 0) in what ever
memory location you choose, select the Copy Calibration command from the