User guide

Page 48 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Setting the Verify Option Section ree: CPN-5600 Menu System
Each time an image is saved, the number will increment. e default is 1. e
num bering is remembered by the CPN-5600, even through cycling of power.
Given the example shown, filenames will start with img1.bmp, then incre-
ment to img2.bmp, img3.bmp and so on.
7. Exit the dialog by selecting the Previous Menu button.
8. Exit the menu system.
Setting the Destination for Saved Files
After setting up the file defaults for saving images, you will want to select the
destination for your saved files. Files can be saved to USB memory devices, a
computer using TFTP, or an SMB share.
1. Activate the menu system (see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select CAPTURE.
e Capture dialog appears (see Figure 3-17: Capture dialog, on page 47).
3. Select the Destination as USB, TFTP or SMB.
e CPN-5600 will use your selection whenever you activate the Save
command from either the digitizing tablet or the touch screen.
4. Exit the menu system.
Setting the Verify Option
In circumstances where it is important to know that a file has been successfully
saved or printed, this setting allows you to verify the end result. If you turn Verify
on, a dialog will appear after each save or print comand, asking you to verify that
the image was successfully saved or printed.
1. Activate the menu system (see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select CAPTURE.
e Capture dialog appears (see Figure 3-17: Capture dialog, on page 47).