User guide

Page 38 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Selecting Video Sources Section ree: CPN-5600 Menu System
You can override the default selection by choosing a different video mode. If there
is an output, but no input, the CPN-5600 will display the chalkboard (see
Activating the Chalkboard, on page 87).
You can select a video mode from the tablet, keyboard, or menu system. e menu
system offers additional adjustments for brightness, contrast, saturation and hue.
From the Tablet
Click on the icon for the desired video input.
NOTE: e inputs are listed on the template.
e CPN-5600 switches to the source you select.
From the Keyboard
Activate the desired Video In command.
Refer to the keyboard commands for your desired input, located in the
Appendix (see Activating the Menu, on page 29).
e CPN-5600 switches to the source you select.
From the Touch Screen
Activate through the use of touch screen areas.
Set two of the touch screen corners to PREV VIDEO and/or NEXT VIDEO.
You can then cycle through the available inputs and chalkboard. (see Touch
Screen Command Areas, on page 44).
e CPN-5600 switches to the source you select.
From the Menu System
NOTE: Composite and Y/C are available but only at half their normal
resolution.
1. Activate the menu system (see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select DISPLAY.