User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 37
Section ree: CPN-5600 Menu System Selecting Video Sources
NOTE: Moving the indicator to the left will decrease brightness. Moving the
indicator to the right will increase brightness. If the brightness is set too high
for the display, the markers will smear across the image.
5. Exit the dialog by activating the OK button.
Changing Pen Proximity
e CPN-5600 with digitizing tablet may have Pen Proximity on or off. When
Pen Proximity is enabled, the active pointer disappears as you move the pen tip
away from the tablet. When Pen Proximity is disabled, the active pointer remains
on-screen even when you pull the pen away from the tablet or moni tor. You must
have turned the active pointer on for this feature to work.
You can change Pen Proximity from the tablet (Broadcaster template only), or
from the menu system. Factory setting is Off.
From the Menu System
1. Activate the menu system (see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select ANNOTATION.
e Annotation Menu appears (see Figure 3-3: Annotation Menu, on page 31).
3. Select PEN PROXIMITY.
e colored fill in the PEN PROXIMITY box indicates the new sta tus. e
colored fill means that pen proximity is enabled.
4. Exit the menu system.
You can now point and draw using the new PEN PROXIMITY set ting.
Selecting Video Sources
e CPN-5600 starts in the DEFAULT mode, which automatically detects the
video inputs and outputs on power up. Whatever video input is selected will be
output to both video outputs.