User guide

Page 36 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Selecting a Brightness Level Section ree: CPN-5600 Menu System
From the Keyboard
1. Repeatedly activate the Change Brightness command until the mark ers
display the desired brightness level.
(see Activating the Menu, on page 29)
NOTE: You can move backwards through the brightness levels by activating
the reverse toggle command.
2. Exit the Brightness mode by selecting any other function.
From the Menu System
1. Activate the menu system (see Activating the Menu, on page 29).
e Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select ANNOTATION
e Annotation Menu appears (see Figure 3-3: Annotation Menu, on page 31).
3. Select BRIGHTNESS.
Figure 3-5: Set Brightness Dialog
e Set Brightness dialog appears.
4. Select the level of brightness you desire.