User guide

Page 22 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Connecting Controllers Section Two:Installation
NOTE: Make all connections before applying power.
1. Makevideoconnectionsasindicatedearlierinthissection,andinstallthe
touchscreentothemonitorasdirectedbyyourtouchscreenman-
ufacturer.(seeConnectingAudio/VideoSourcesandOutputs,onpage
17)
2. ConnectaUSBcableandextensiontotheUSBportonthePointmaker.
Pointmaker
Touch Screen
and Monitor
Video OUT
USB or
COMM Port
Video IN
USB or RS-232 IN
Figure2-3:Touchscreenhook-upoverview
NOTE: Be sure to calibrate the touch screen on start up (see Calibrating
CPN-5600 Controllers, on page 46).
IfinstallingtheoptionalDTX-DRVextensions:
1. ConnectthefemaleDB-9connectortothemaleDB-9connectoronthe
DTX-DRVextensiontransmitterfromthetouchscreencable.(male
microdriver).
2. UsinganUnshieldedTwistedPair(UTP)cablewithRJ-11connectors,
connectthemalemicrodrivertothefemalemicrodriver.
3. ConnecttheDTX-DRVextensionreceiver(femalemicrodriver)toa
COMMportonthebackoftheCPN-5600.
Connecting a Mouse Device
1. ConnectthemousedevicetoaCOMMportonthebackofthePoint-
maker.