User guide

Page 18 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Connecting Audio/Video Sources and Outputs Section Two:Installation
IfconnectingCompositevideoinputs:
1. UsingaBNCcable,connectaPointmakerCOMPOSITEINPUT
connectortothevideooutputconnectoronacompositevideosource.
YoucanrepeatthisprocesswiththesecondCOMPOSITEINPUT
connector.
In
1(Y)
2(C)
Out
+12
@72W
3
5
6
7
8 9
1
2
3
1
2
1
2
4
Video Input Video Output LAN
COMM
Figure2-1:CompositeConnectors
IfconnectingY/C(S-Video):
Connecting Y/C (S-video) can be accomplished using a “Y” adapter cable (also
known as a breakout cable) with two male BNC connectors at one end and an
S-video connector at the other end.
1. ConnectthetwoBNCconnectorstothePointmakerYandCINPUT
connectors,andtheS-videoconnectortoaS-videooutputconnectorona
S-videosource.
NOTE: To switch to composite, it is necessary to select it from the digitizing
tablet tem plate, menu system, or keyboard controller.
VGA Connectors
IfconnectingVGA-Video:
1. VGAInputs(2):UsingaVGAvideocable,connectaPointmakerVGA
INPUTconnectortoavideooutputconnectoronaVGAvideosource.
In
Out
+12
@72W
3
5
6
7
8 9
1
2
3
1 1
2
4
Video Input Video Output LAN
COMM
1(Y)
2(C)
2
Figure2-2:VGA-VideoConnectors