User guide

Boeckeler Instruments, Inc. Pointmaker CPN-5600, CPN-6000 Color Video Markers - Page 17
Section Two:Installation Connecting Audio/Video Sources and Outputs
General installation
Installation of the Pointmaker CPN-5600 can be divided into the following four
areas:
• ConnectAudio/VideoSourcesandOutputs
• ConnectControllers
• ConnectLAN
• PowerUp(leavingtheCPN-5600tolast)
Connecting Audio/Video Sources and Outputs
Analog audio input and output ports are supplied for stereo mini plugs (3.5mm).
In
1(Y)
2(C)
Out
+12
@72W
3
5
6
7
8 9
1
2
3
1
2
1
2
4
Video Input Video Output LAN
COMM
Figure2-1:AnalogAudioConnectors
For connecting video sources, the CPN-5600 supports Composite, Y/C, VGA and
HDMI.
For connecting video displays (screens or projectors), there is support for VGA and
HDMI (and DVI-D, if you use a HDMI to DVI-D adapter).
NOTE:CompositeandY/Careavailablebutonlyathalftheirnormal
resolution.
NOTE:Makeallconnectionsbeforeapplyingpower.
Composite or Y/C (S-Video) Connectors
e video inputs on the CPN-5600 support either two composite inputs or a
single input of Y/C (S-Video). For Y/C, both BNC connectors are used. One
connector carries the “Y” information and the other carries the “C” information.