User guide

Page 142 - Pointmaker CPN-5600, CPN-6000 Color Video Markers Boeckeler Instruments, Inc.
Quick Reference for Devices Appendix
Quick Reference for Touch Screens and Whiteboards
e commands in this table are for a compatible touch screen or whiteboard, when
used with the Pointmaker CPN-5600. If a function you want is not listed in this
table, then you must select that function on the digitizing tablet or in the menu
system.
CoMMand operation
Anchor a Marker Quickly tap screen where you want the marker anchored.
Clear Markers Tap lower left corner. All markers are cleared from the screen.
Color, Change Tap top left corner. e marker color is changed to the next
color activated in the Color Palette.
Draw Press and drag finger.
Freeze Video Tap top-right corner. A frame of running video is grabbed
and displayed. Tap same spot again to return to video.
Point Lightly drag finger across Tracking Area to position pointer.
To keep pointer positionable, do not tap or press.
Print Screen Image Tap the right-center area on the screen. e current image is
sent to the printer.
Save Screen Image Tap the left-center area on the screen. e current image is
saved to the USB storage device.
Send Screen Image Tap the bottom-center area on the screen. e current image
is sent to the printer.
Undo/Erase Marker Tap upper right corner. Activates either undo or erase
com mand, depending on which mode has been chosen in the
menu system.
Menu System, Access Tap top center area. Pointmaker menu system is activated.
(Operational only when keyboard not installed.)
Quick Reference for Other Mouse Devices
e commands in this table are for a compatible mouse device when used with the
Pointmaker CPN-5600. If a function you want is not listed in this table, then you
must select that function on the digitizing tablet or in the menu sys tem.
CoMMand operation
Anchor a Marker Click the Left (First) Button.
Clear Markers Press Right (Second) Button.
Color, Change Marker Press Right (Second) Button, then click Left (First) But ton.
Each click cycles to another color in the Color Palette.
Draw Press Left (First) Button and draw while pressing.
Point Lightly drag mouse across pad to position pointer. To keep
pointer positionable, do not click or press any button.
Menu System, Access (Operational only when keyboard not installed.) Press
Right (Second) Button, then Left (First) Button, pressing
both together for about 5 seconds.
Undo/Erase a Marker Click Right (Second) Button. If Erase Mode is activated in
the menu system, this command activates Erase Mode instead
of undoing a marker.